| Rare Earth VersaLift™ Magnets | ||||||||||||||||
| Lift | Overall | Magnet | Handle | Bail | Lift Lug Adaptor | |||||||||||
| Model No. | LBS | KG | Ht. (in) | Ln. (in) | Ht. (in) | Wd. (in) | Ln. (in) | Wt. (lbs) | Ln. (in) | Th. (in) | Ht. (in) | Wd. (in) | Part No. | Ln. (in) | Wt. (lbs) | |
| VL0275 | 275 | 124 | 6-1/2 | 5 | 3-3/4 | 5 | 3-5/8 | 12 | 6 | 3/4 | 2-1/4 | 1-3/4 | VLLUG1 | 4-1/2 | 3 | |
| VL0600 | 600 | 272 | 6-1/2 | 7 | 3-3/4 | 5 | 5-5/8 | 20 | 6 | 3/4 | 2-1/4 | 1-3/4 | VLLUG1 | 4-1/2 | 3 | |
| VL1200 | 1200 | 544 | 6-1/2 | 11 | 3-3/4 | 5 | 10 | 37 | 6 | 3/4 | 2-1/4 | 1-3/4 | VLLUG1 | 4-1/2 | 3 | |
| VL2500 | 2500 | 1134 | 10-1/2 | 14-1/2 | 5-1/2 | 7 | 13 | 119 | 8-3/4 | 3/4 | 2-1/4 | 1-3/4 | VLLUG2 | 4-1/2 | 3 | |
| Lifting Value in lbs (kg) & *Maximum Sheet Length Due To Sag For Material Thickness For Single Magnet Use | |||||||
| Model No. | 1/4" (6' Lg) | 3/8" (8' Lg) | 1/2" (8' Lg) | 3/4" (8' Lg) | 1" (10' Lg) | 2" (10' Lg) | 3" (10' Lg) |
| VL0275 | 150 (68) | 220 (99) | 240 (108) | 250 (113) | 275 (124) | 275 (124) | 275 (124) |
| VL0600 | 260 (117) | 435 (197) | 525 (238) | 550 (249) | 600 (272) | 600 (272) | 600 (272) |
| VL1200 | NA | 755 (342) | 960 (435) | 1165 (528) | 1200 (544) | 1200 (544) | 1200 (544) |
| VL2500 | NA | NA | NA | 1700 (771) | 1800 (816) | 2500 (1134) | 2500 (1134) |
| NOTE: Holding Values for the VersaLift™ Magnets are stated at 33% of the actual value. We recommend when lifting sheets over 8’, use 2 or more lifts on a spreader bar to prevent sheet flexing, sagging or peel-off. Thin material is susceptible to magnetic bleed through, resulting in two sheets being lifted at once. Round Holding Values are based on ideal conditions. Consult the factory before specifying these magnets for use on round materials. *Max. sheet lengths are selected due to sag characteristics of specified sheet. The item to be lifted must cover the entire length and width of the magnetic poles to properly engage and release the part. CF = Consult Factory, NA = Not Applicable (Magnets will not turn “ON” with stated thicknesses.) | |||||||
| Round Lifting Applications | Vertical Lift (Flat Only) | ||||
| Model No. | Max. Lift - lbs (kg) | Max. Lift at Min. | Min. Diameter / Thickness | Lift - lbs (kg) | Min. Thickness |
| VL0275 | 137 (49) | 50 (22) | 2.00 In. / 0.12 In. | 68 (30) | 1.00 In. |
| VL0600 | 300 (136) | 130 (58) | 2.00 In. / 0.12 In. | 150 (68) | 1.00 In. |
| VL1200 | 600 (272) | 600 (272) | 4.00 In. / 0.50 In. | 300 (136) | 1.00 In. |
| VL2500 | 1250 (567) | 1250 (567) | 8.00 In. / 1.00 In. | 625 (283) | 3.00 In. |